Let's troubleshoot your SpyraLX™Updated 7 months ago
In case your Spyra is not cooperating as you would like to, we do have some tips, to hopefully get them back up & running 😉🔫💦
1. Please pump and shoot at the same time by pulling the handle all the way out and pulling the trigger at the same time as pushing the handle back in. This can act as a reset.
2. Try pushing the trigger 15 to 20 times back to back. This should normalize the pressure inside your SpyraLX.
3. If you do not feel a resistance when pushing the trigger, you can try flicking it forward. It should be usable as intended again, after.
4. If your SpyraLX is heavily leaking, you can try shooting a couple of times. This should fix the issue. The leakage is caused to an overpressure in the tank.
Please note, that potential leakage might depends on the filling line. If you put the Spyra too much into the water, the water will run in and unfortunately subsequently phased out again.
If the troubleshooting tips are not helpful for you, please feel free to send us a return or exchange request at:
EU-Shop Customers: https://eu.spyra.com/a/return
UK-Shop Customers: https://uk.spyra.com/a/return
For any further ❓, reach out via 💌: [email protected]